| Availability: | |
|---|---|
| Quantity: | |
DF EQ2100 (original factory code EQ245) is DF a 6×6 all-wheel drive long-head off-road special chassis developed based on military off-road requirements. It is upgraded and optimized on the basis of EQ2082, and is finalized to 3.5 The ton-level military off-road load-bearing chassis takes into account both military special modifications and civilian extreme working conditions. It is a representative of the domestic classic three-axis all-wheel drive off-road chassis. Two versions, military standard and civilian modified, have been launched simultaneously. It has three core advantages: mature and reliable, strong modification compatibility, and outstanding all-area passability. It adopts DF classic pointed single-row all-metal welded enclosed cab, single large flat windshield, wide field of vision, and nuclear load capacity of 3 There are reserved installation spaces for military equipment inside the cab. The rear window is equipped with a protective net as standard. The instrument layout is simple and durable. It is equipped with a 24V electrical system for the whole vehicle, which is suitable for low temperature and complex power supply scenarios in the wild. The original factory comes standard with anti-aircraft lights, firearm fixing brackets, and anti-cold starting devices. It can start normally in low temperature environments of -40°C.
Modification directions: troop transport shelter vehicles, field command vehicles, cooking support vehicles, ammunition transport vehicles, reconnaissance and communication vehicles, light artillery tractors, and field oil tankers. Forest firefighting personnel carriers, mountain sprinkler and dust suppression vehicles, off-road oil transport vehicles, field exploration engineering vehicles, mine short-distance transport vehicles, off-road Motorhome, emergency rescue shelter vehicles, mountainous dump transport vehicles, and livestock material transfer vehicles.
All-wheel drive passes: three-axis synchronous drive + differential lock + Large ground clearance, suitable for all areas of mountains, swamps, Gobis, and ice and snow; sturdy and easy to maintain: the mechanical transmission assembly has no complex electronic controls and can be repaired with simple tools in the field, adapting to remote areas without logistics; high modification compatibility: sufficient installation space is reserved for long-head beams, shelters, tanks, The equipment cabin can be retrofitted without damage; high and low temperature full range adaptability: original cold start, waterproof sealing design, stable operation from minus 40°C to high temperatures in the Gobi; balanced load-bearing and durability: three-bridge and other load-bearing design, heavy loads will not be unbalanced, the steel plate suspension is impact-resistant, and will not be easily damaged under long-term harsh working conditions.
| Basic information | |
| drive | 6*6 |
| direction | left rudder |
| Chassis size | 7670*2355*2480mm (the widest point is the edge of the rear wheel) |
| total mass | 10800kg |
| curb weight | 5680kg |
| Chassis configuration | |
| cab | Pointed head, single row (air conditioner can be installed) |
| Number of seats | 3 people |
| Wheelbase | 3600+1250mm |
| Frame | 860*232mm |
| engine | Cummins B190 33/optional B210 33 |
| Gearbox assembly | Manual 5-speed/6-speed/small eight-speed |
| transfer case assembly | High and low gears |
| Maebashi | 3.5T |
| middle bridge | 3.5T |
| rear axle | 3.5T |
| tank | 300/210L (adjusted according to space) |
| circuit | 24V circuit system |
| suspension system | Leaf spring 9/12 |
| Braking method | Air brake |
| tire | 12R20/12.5R20 (6+1) |
| Bodywork configuration | |
| cargo box | ≥4685mm |
| engine | |
| engine | Cummins B190 33 |
| horsepower | 190 |
| emission | National Three |
| Displacement | 5.9L |
| Number of cylinders | 6 |
| Output power | 140kw |
| Torque | 640N.m |
| Speed | 2500rpm |
| Fuel type | diesel fuel |
| Performance parameters | |
| speed | 85km/h |
| approach angle | 28° |
| departure angle | 36° |
| Wheelbase | 1960mm |
| front/rear suspension | 1214mm/1916mm |
| Obstacle clearance height | 450mm |
| ground clearance | 360mm |
| wading depth | 1225mm |
| gradeability | 60% |
| The upper plane of the frame is off the ground | 1130mm |
| other | |
| other | Water barrels, oil barrels, fire extinguishers, vehicle tools |














The first step: Negotiate purchase requirements
Customers can inform us of their needs by phone/WeChat or on-site inspection.
Step 2: Customize the plan
The company will recommend corresponding models or customize vehicle configurations according to your needs.
Step Three: Sign the Contract
Both parties sign a vehicle purchase and sale contract and pay the contract deposit in advance (the contract can be signed by fax or in person).
Step 4: Arrange production
Issue production plans and arrange production.
Step Five: Vehicle Completion
After the vehicle is offline for inspection, the remaining balance of the vehicle must be paid and relevant procedures completed.
Step Six: Logistics Departure
Customers can pick up the vehicle from the factory, or negotiate with our company to arrange delivery to a designated location.
other :
1. The company can provide customers with export customs declaration services.
2. Complete after-sales service station to solve your worries!